亚洲欧美中文字幕影院,欧美成人激情免费一区,亚洲成AⅤ人在线观看无码,欧美日激情日韩精品嗯

免費注冊快速求購

當前位置：儀器網 > 產品中心 > 行業專用儀器>其它行業專用儀器>其它> 榮計達建筑幕墻耐撞擊試驗儀MC-III

返回產品中心>

舉報 評價

榮計達建筑幕墻耐撞擊試驗儀MC-III

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱 上海榮計達實驗儀器有限公司
品牌
型號
所在地
廠商性質 生產廠家
更新時間 2023/2/16 10:24:29
訪問次數 100

在線詢價 收藏產品點擊查看聯系電話

索取相關資料

促銷詳情

促銷時間：

特價說明：

促銷詳細：

2020年01月08日至 2020年02月08日

特價促銷

模內澆口分離自動化，降低對人的依賴度；傳統的塑膠模具開模后產品與澆口相連，需二道工序進行人工剪切分離，模內熱切模具將澆口分離提前至開模前，消除后續工序，有利于生產自動化，降低對人的依賴。

詳細信息在線詢價

一、產品簡介：
建筑幕墻耐撞擊檢測設備又稱幕墻耐撞擊性能測試裝置,它主要用于測試各種類的幕墻或其它類似建筑維護結構的耐抗撞擊性能的測試,建筑幕墻耐撞擊性能檢測儀器又名幕墻耐撞擊性能測試裝置,主要是檢測幕墻對抗冰雹、大風時飛來物、飛鳥等室外撞擊及室內人員、物品沖擊的抗沖撞能力。耐撞擊性能也是對幕墻材料在沖擊荷載作用下的承載能力的一種要求。幕墻的撞擊力取決于物體的重量、形式、剛度以及撞擊的速度。
Product introduction:
Building curtain wall impact resistance testing equipment is also known as curtain wall impact resistance testing device.It is mainly used to test the impact resistance of various types of curtain walls or other similar building maintenance structures.The test equipment for building curtain wall impact resistance is also known as curtain wall resistance. The impact performance testing device is mainly used to detect the impact resistance of the curtain wall against outdoor impacts such as hail, flying objects, birds, etc., and indoor personnel and items. Impact resistance is also a requirement for the bearing capacity of curtain wall materials under impact loads. The impact force of the curtain wall depends on the weight, form, stiffness and speed of the object.

二、可執行標準：
幕墻耐撞擊性能測試裝置是依據國標GB/T15227-2007建筑幕墻氣密、水密、抗風壓性能檢測方法,GB/T18250-2000建筑幕墻平面內變形性能檢測方法,GB/T21086-2007建筑幕墻,GB/T21086-2007附錄F（規范性附錄）耐撞擊性能試驗方法的要求所設計和開發,各項性能參數指標符合以上標準,是幕墻檢測設備中信譽度好的檢測設備。
Second, executable standards:
The curtain wall impact resistance test device is based on the national standard GB / T15227-2007 building curtain wall airtight, watertight, and wind pressure performance testing method, GB / T18250-2000 building curtain wall in-plane deformation performance testing method, GB / T21086-2007 building curtain wall, GB / T21086-2007 Appendix F (normative appendix) Designed and developed according to the requirements of the impact resistance test method, each performance parameter index fully meets the above standards, is a good reputation among curtain wall testing equipment.

三、技術參數：
1. 在大降落高度處，懸掛鋼絲繩與掛點水平面的水平夾角>14°；
2. 撞擊物體和懸掛鋼絲繩在自由狀態時，輪胎外緣與試件表面的距離>5mm，且<15mm；
3. 撞擊物體的幾何**位于被撞擊點50mm為半徑的圓形范圍內。
4. 撞擊物體釋放裝置能夠準確定位撞擊物體的提升高度，保持撞擊物體**線和懸掛鋼絲繩**線在同一條直接線，撞擊物體被釋放后將自由下落。
Third, the technical parameters:
1. At large landing heights, the horizontal angle between the suspended wire rope and the horizontal plane of the hanging point is> 14 °;
2. When the impact object and the suspension wire rope are in a free state, the distance between the outer edge of the tire and the surface of the test specimen is> 5mm, and <15mm;
3. The geometry of the impact object lies within a circular range with a radius of 50 mm at the point of impact.
4. The impact object release device can accurately locate the lifting height of the impact object, keeping the impact object ** line and the hanging wire rope ** line on the same direct line. After the impact object is released, it will fall freely.